Methodology
How we test lawn tools
Every guide is checked against manufacturer specs, hands-on use, and current retail listings before it publishes.
The process
1. Start from the question, not the product
Every guide begins with the exact thing people type into search: how deep should I edge, why is my aerator not pulling plugs, what sand mix levels Bermuda. The answer goes in the first box on the page.
2. Measure the specs that change the job
Bare-tool weight and weight with the battery installed. Blade depth stops, not blade diameter. Hopper width and real walking speed on a spreader. Tine spacing and plug depth on an aerator.
3. Use the tool on a real lawn
Clay in the back yard, sandy loam in the front, a concrete driveway edge and a paver walk with polymeric joints. Tools get used across a full season, not for one afternoon.
4. Re-check listings before publishing
Model numbers get revised mid-generation. Before a guide goes live or gets updated, every recommended product is matched to a current retail listing and any dead pick is replaced.
5. Update instead of republish
When something changes we edit the existing guide and move its updated date rather than spinning out a near-duplicate page.
What we don’t do
- No sponsored placements. Nobody can buy a recommendation, a badge or a ranking position.
- No manufacturer review copy in exchange for coverage.
- No invented test numbers. If we did not measure something ourselves, the guide says where the figure came from.
- No filler ranking of ten identical tools when two are worth owning.
How we make money
Lawn Tool Hub earns a commission when a reader buys through an Amazon link on the site. That commission is the same whichever product you pick, so it never decides the ranking. Full terms are on the affiliate disclosure page.
Found something wrong?
Specs change and we get things wrong sometimes. Send a correction and we will fix the guide and note the change.